Vehicle Specialty Tools

Features & Benefits: Kit contains tools to install mains haft cone bearing, main shaft rear support roller bearing inner race, countershaf...

Features and Benefits: This Terminal Release Tool is required for removal of the vehicle's injector wiring harness without causing damage to the c...

Features & Benefits: Set of adaptors will protect, install and size the torque converter fluid seal ring into the stator support during un...

Features and Benefits: Signal test light for 1987 and newer General Motors Model 700 TBI and PFI fuel injection systems with flat 4-pin conne...

Features and Benefits: 3" outside diameter 2-3/4" inside diameter Aids in the removal and replacement of ball joints Durable construction 3" in. o...

CUP, REMOVER

Features & Benefits: Protects seal from being cut or nicked, both of which can cause immediate or eventual leaks Similar to J-44394-A ...

NUT, SPECIAL

Features and Benefits: Made from high-quality materials to ensure long-lasting performance and durability Designed for use with F-Series Super Dut...

GLOW PLUG CONN.REM/INST

Features & Benefits: Verifies that the camshaft fuel pump lobe is at base circle position before installing the high pressure fuel pump. ...

Features & Benefits: Used for removal of the direct injection fuel rail without damage The rail assembly must be removed as straight a...

Crankshaft Damper Puller Remover

Features and Benefits: Correctly installs the seal onto the axle shaft and into the wheel knuckle Prevents front hub vacuum leaks that would cause...

Features and Benefits: 2-1/2 in. outside diameter 2-1/4 in. inside diameter Durable construction Weight: .600 lbs. Has a 2-1/2 in.; in.; outer dia...

Threaded Connector

Features and Benefits: Works on 1998 - 2004 Ford F-250, F-350, F-450 and F-550 4 x 4's having the vacuum-operated front axle Correctly installs t...

POWER STEERING EVAC. CAP

Features and Benefits: Belt tension gauges are used to properly check drive belt tension on drive belts to ensure maximum belt and bearing life Sc...

Features and Benefits: Designed to disconnect transmission lines on Ford Taurus/Explorer 2005 and newer Similar to OE part number 307-569 ...

Features and Benefits: Universal application Used with 204-037, 204-038, 204-039 and 205-118 Vehicles:  Taurus/Taurus X/Sable, MKS, Fl...

Features and Benefits: For installing gauge between pump and hose coupling Has 1/4" and 3/8" NPTF internal and 3/8" NPTF external Genu...

Features and Benefits: Salvage those thin chrome window trim pieces and save money with this handy addition to your body tool selection Ge...

Features and Benefits: Standard internal/external threaded adaptor For use on the ends of Push-Puller legs or forcing screws when pulling ...

Features and Benefits: 35 adapters included to remove and install ball joints Vehicle application chart and diagrams included Works on...

Features and Benefits: Will work on even the most stubborn shock links and tie rods Just insert the tapered wedge between the seized parts...

Features and Benefits: Including GM TBI, Ford, Chrysler, and Jeep vehicles 0-100 PSI fuel pressure gauge 35 of the popular OTC fuel injection adap...

Features and Benefits: Ball joint service is easier with this tool Designed to remove ball joints from spindle support arms Can be use...

Features and Benefits: 20 adapters included to remove and install ball joints Works on upper and lower ball joints on: 1996 – 2008 Chrysle...

6 FT. HOSE 1/4 NPT

Features and Benefits: 18 adapters included to remove and install ball joints Application cross reference and instructions included Wo...

Calibration Fluid 1 Gallon

Features and Benefits: Cam tools ensure correct cam timing when servicing timing belts, chains, head gaskets or other valve train repairs ...

HOSE, PRESSURE

Features and Benefits: Same as Ford T93P-12200-A  

Features and Benefits: Designed as a holding ring with three pins to fit into the openings on a harmonic balancer Use with a 1/2" ratchet ...

Features and Benefits: Safety locking pins hold the compressor jaws in place Tool compresses springs of 4 in. to 9 in. O.D., with wire diameters o...

Features and Benefits: Installs into the oil priming port in the oil module Allows for proper engine pre-lubing, preventing dry starts after engine...

INSTALLER, KNUCKLE SEAL

Features and Benefits: Fits 1997-2006 Explorer/Mountaineer 4.0L SOHC V6 Ford Tool Part No.: T97T-6256-A and 303-529 Prevents the cam s...

FORD CAM HOLDING Set

Features and Benefits: Works on 1994-2002 2.0L 4 cylinder DOHC Zetec, Contour, Mystique Same as Ford 303-465 Cam tools ensure correct ...

Features and Benefits: Cam tools ensure correct cam timing when servicing timing belts, chains, head gaskets or other valve train repairs ...

Features and Benefits: This tool is used to separate the ball joint from the spindle support arm Works on many domestic and import front wheel dri...

Features and Benefits: 2-3/8" 6 point locknut socket Wheel bearing locknuts are easy to remove or install with these specially designed sockets So...

Features and Benefits: Kit contains a fuel injector connector tube remover and fuel injector puller The fuel injector connector tube must ...

Features and Benefits: Magnetically attaches to pre-loosened oil pan drain plugs Patented design provides universal application to hex heads Flexi...