Products

Features and Benefits: Minimum spread of 1/2" and a maximum spread of 4-5/8" Use with puller Nos. 1035, 1036, 1037, 1038 and 927 Wei...

Features and Benefits: Reach equals leg length plus 2 inches with leg end caps Extra pair of legs for the OTC 938 Push-Puller Also ava...

Features and Benefits: This 3 jaw puller has a 25 ton capacity Maximum reach: 22-1/4"; Maximum spread: 20" Screw size: 1-1/4"-12 x 15-...

Features and Benefits: This 2 jaw puller has a 25 ton capacity Maximum reach: 15-1/2"; Maximum spread: 18" Screw size: 1-1/4"–12 x 15-...

Features and Benefits: This 2 jaw puller has a 17-1/2 ton capacity Maximum reach: 18-3/4"; Maximum spread: 16" Screw size: 1"-14 x 13-...

Features and Benefits: This 2/3 jaw puller has a 13 ton capacity  Maximum reach: 11"; Maximum spread: 12" Screw size: 13/16" - 16 x 12" ...

Features and Benefits: This 2/3 jaw puller has a 7 ton capacity Features long jaws Maximum reach: 8-3/4"; Maximum spread: 11" Screw siz...

Features and Benefits: This long 2 jaw puller has a 7 ton capacity Features reversible jaws Maximum reach of 8-3/4", maximum spread: 9-1/2...

Features and Benefits: This 2/3 jaw has a 5 ton capacity Features reversible jaws Maximum reach: 5-1/2"; Maximum spread: 7" Screw s...

Features and Benefits: This 2 jaw puller has a 5 ton capacity Features reversible jaws Maximum reach: 3-1/4"; Maximum spread: 6" Screw ...

Features and Benefits: This 3 jaw puller has a 1 ton capacity Maximum reach of 2-1/8" and the maximum spread of 3-1/4" Screw size 5/1...

Features & Benefits: Single-phase, 115/230 voltage (AC), 16.0 amps at low voltage 2 ton rated load, 20 ft. lift height, 8 ft./min. lifting spee...

Features & Benefits:  Interchangeable Tanks, No Manual Pumping Add-on and Interchange Tank Assembly to Eliminate Cross-Chemical Contamination ...

Features and Benefits: TORQUE LOCK™: Faster setup and easy release Wide Jaws: provide more clamping versatility on variety of shapes and surfaces F...

Features and Beneifts: Delivers over 8,000 PSI for heavy duty applications Superior run-time - up to 7 grease cartridges per battery charge Hose st...

Features & Benefits: Perfect complement to the RCP line of reciprocating air compressors Use with 10-15 HP Air Compressor 115 Volt...

Features and Benefits: Caterpillar and Cummins (except L-10 & C) - fits all wet liners from 3-7/8" to 6-1/4" bores up to 15" deep Built to use ...

Features and Benefits: Ensure dependable performance of rams and pumps by using this high-grade, specially prepared oil Contains foam sup...

Features and Benefits: Use to bleed brake systems and remove a variety of fluid from vehicles, such as antifreeze, oil, transmission fluid, ge...

Features and Benefits: Also can be used on the 25-Ton and 55-Ton capacity press Made with durable construction Weight 5 lbs., 5 oz This is...

Features and Benefits: Removes and installs press-fit parts Can be used with Nos. 1126 and 1127 bearing pulling attachments or No. 680 pul...

Features and Benefits: 10 tons of pulling power Has a reach of 8 3/8", puller legs are 6 3/4" long, with a spread of 7 1/4" Can be used with sever...

Features and Benefits: Necessary for pulling and installing bearings, gears or other parts found on hollow shafts or housings May be used ...

Features and Benefits: Designed to protect shaft centers from distortion when extreme pressures are applied with either Grip-O-Matic

Features and Benefits: Puller jaws can be set up for 10-way internal or external jobs Attachments include a dent puller, internal/external pulling...

Features and Benefits: Puller jaws can be set up for 2/3-way internal or external jobs Attachments include a dent puller, internal/externa...

Features and Benefits: This tool pulls C.V. joints on 1986-current Taurus/Sable Will also pull other joints having hidden retaining rings Pry bars...

Features and Benefits: 1.5 gallon capacity (6.0 liter) Extracts or dispenses at the turn of a valve Automatic pressure relief valve fo...

Features and Benefits: Pulls harmonic balancers, timing gears, and parts having two or three tapped holes Slotted holes in puller body permit cap ...

Features and Benefits: Required for use with No. 6735 Sprinter Van Ball Joint Kit When used with OTC No. 6730 Update Kit, you can expand the applic...

Grip Wrench Adapter Set

Features & Benefits: 8-3/8" crossbar rated to 8 ton Spread range is 2" to 7-1/4" Includes sliding plates to ensure smaller gear bo...

Desiccant Replacement

Features and Benefits: Two specialty pullers in one box Flange type puller for removal of harmonic balancers, timing gears, and other parts with t...

Features and Benefits: The puller will spread from 2" to 7-3/4" Block is 8-1/4" wide, and its forcing screw is 3/4" - 16 x 11-5/8" long Accommodat...

Aluminum Vise Inserts

Eaton

Features and Benefits: Configuration conversions take just seconds; no wrenches required 2 or 3 Jaw application, with a 7" maximum reach, ...

Hook for Puller Set

Features and Benefits: Includes a bearing splitter with 4" capacity, two sets of hex push puller legs, a 8" bar type puller head mated with a cust...

TIP, HEAVY DUTY 90 DEG.

Features and Benefits: Designed to remove the battery cable clamp from the post Will not damage the battery Spring loaded sharp jaws g...

Replacement handle

ASSY., FLARING BAR

Replacement 1/2in. Collet / Pin Assembly

Features and Benefits: Use to pull a pilot bearing from the end of the crankshaft A restriction plate catches the bridge and prevents the ...

Features and Benefits: Use to pull a pilot bearing from the end of the crankshaft interchangeable jaws One set of jaws covers a spread...

JAW