Products

Features and Benefits: Indestructible handle never needs replacement Outlasts wood and fiberglass handle hammers by well over 30,000 overs...

Features and Benefits: Provides safe and efficient handling of fuel tanks Adjusts horizontally from 24" to 38" and vertically from 7" to 11" to se...

Hendrickson Fabricated Bar Pin Adapter Set

Features and Benefits Unique slide hammer design eliminates prying against the wheel finish and potential scratches The new wheel cap serv...

9-1/2" Working Length Legs for OTC-938 Push / Puller, pair

22-1/2" Working Length Legs for OTC-938 Push / Puller, pair

Features and Benefits: Four heavy-duty phenolic casters 1,500 lb. capacity per unit  Hydraulic lift mechani...

Features and Benefits The new ergonomic wheel loader and tipper integrates two very helpful tools into one The wheel loader feature allows...

Features and Benefits: Makes bead-seating a one-man job! Perfect for applications where the tire valve is facing the floor while seating t...

Features and Benefits: Unique "Convex Slip Head" curved design allows the spoon to slide easily into the tire bead Spoon bump limits the d...

Pk 5,O Ring-114-Ntrle-70

Features and Benefits: Has a .090" diameter 90 degree angled tip Plastic grip handles Designed to fit hydraulic cylinders on most farm and constru...

Features and Benefits: Unique "Convex Slip Head" curved design allows the spoon to slide easily into the tire bead while the spoon bump limits...

Sleeve Installer Plate 3-3/16 - 3-7/16"

KIT, PROTECTIVE BLANKET

Features and Benefits: Head assembly for 1173 slide hammer puller The head has a jaw spread of 1/2" to 1-3/8" Adjusted by turning the ...

Features and Benefits: The bore of the shaft diameter range 1/8" to 21/32" for these ring series: 5100, 5101, 5102, 5555 and the size range 12,...

Features and Benefits: Pressure gauge with protective boot and hanger 0-7 BAR Included in OTC numbers 6550, 6551 and 6552 Fuel Injecti...

Features and Benefits: .038 Diameter 0 degree tip Reversible, used on inside and outside snap rings OTC Retaining Ring Pliers, Straight, .038" in....

Puller Leg Set, 28" Long

30" Working Length Legs for OTC-938 Push / Puller, pair

Features and Benefits: T100, 4 Runner, Sequoia, LandCruiser, Tundra, Tacoma, Lexus, as well as select Nissan Mitsubishi and Izuzu models. Used to ...

Features and Benefits: This tool is designed to install the bearing on 2" diameter input shafts used in Eaton™ Fuller™ Roadranger™ transmissions

Auxiliary Countershaft Shim Tool with Support Strap

Features and Benefits: Designed for 1/2" square drive ratchet or breaker bar The socket fits the slotted adjusting screw in tapered kingpins used ...

Features and Benefits: Replaces self-adjuster mechanism on Spicer self-adjust clutches Allows you to manually adjust them with a wrench or...

Features and Benefits: The gauges in this set enable you to check the adjustment of pull-type, heavy duty clutches, ensuring their correct operati...

Features and Benefits: OTC Tools & Equipment 503052 SCREW FORCING Features and Benefits: Power Unit refill sprays up to 16 oz. of product. O...

Features and Benefits: Handles 14" and 15-1/2" clutch assemblies weighing up to 250 lbs 360

Features and Benefits: This wrench allows for simple adjustment of drive belt tension or rear wheel alignment. Eliminates the need to remo...

Features & Benefits: Universal piston ring compressor to compress piston rings during piston installation Adjustable handle provides an effect...

Features and Benefits: Plastic Storage Case Waterproof protection and insulation on solder connections Adhesive lined inner wall to se...

Features and Benefits: These screwdrivers are perfect for those limited access fasteners typically found on carburetors, in electrical compart...

6mm-10mm Replacement Pin

Features and Benefits: Universal antenna wrench Ford radio removal tool Deep sockets to remove and install tamper-proof radio nuts fro...

Features and Benefits: Reversible 2-in-1 tool removes and installs press-fit alternator and power steering pump pulleys Also removes and installs ...

Features and Benefits: Removes wiper arms on many foreign and domestic cars and light trucks Will not damage wiper arm or hood cowling during remo...

Features and Benefits: Designed to easily remove the sensor Has an offset 3/8" drive Heat-treated cast steel Also available as par...

Features and Benefits: Designed to easily remove sensor Heat treated cast steel Ideal for 7/8" vacuum switch and O2 socket Also av...

Features and Benefits Adjustable jaws fit various water-pump pulley bolt patterns Jaws adjust from 1/2" to 8-5/16" opening Jaws lock in place to se...

Battery Cable Cutting Pliers, 7" Long, for Copper or Aluminum, with Coated Handles

Battery Post Cleaning Brush, for Positive and Negative Posts, with Plastic Cover

Features and Benefits: Designed to remove and install frost plugs used in liquid-cooled gas and disel engines found in automobiles, trucks, SUVs, ...

Features and Benefits: Jointed jaws rotate 180 degrees Slip joint handle design Provides access where standard pliers do not Cushi...

Features and Benefits: Jointed jaws rotate 180 degrees Slip joint handle design Provides access where standard pliers do not Cushi...

Features and Benefits: Forged and heat-treated frame with offset handle works where ordinary nut splitters may fail Smooth action cracks nuts with...

Features and Benefits: Small pliers: 13-1/2" long and fits filters ranging from 2-1/4" to 5" (57 mm to 127 mm) in diameter Large pliers: 18" long ...

SET, PICKLE FORK DRIVER