OTC

Features and Benefits: Remotely tests hydraulic oil circuits on your machinery with high accuracy For use with the OTC4292 Hydraulic Flow ...

Features and Benefits: Tests hydraulic oil circuits on your machinery with high accuracy Protected by a durable steel case Measures fl...

Features and Benefits: Allows easy removal and installation of the lower ball joint on 1996-2004 Ford Taurus and Mercury Sable vehicles Lo...

Features and Benefits: Works on 1994-2003 7.3 diesel engine in Ford 3/4 and 1 ton trucks A complete kit with the tools you need to properly remove...

Features and Benefits:   For use on the ends of Push- Puller legs or forcing screws when pulling shafts, bearing caps, pinions, etc. Inter...

AIR BAG SIMULATOR

Features and Benefits: Spring return; cylinder retracts quickly in any orientation Twin ram engineered for increased strength and durabili...

Features and Benefits: New Pegisys with 2 Year Warranty 12 month Domestic/Asian Vehicle Subscription J2534 Reprogramming 3825-08 kit ...

Features and Benefits: Services 1995-1998 Ford F-series 3/4 and 1 ton trucks with automatic hubs 1/2" square drive Wt., 2 lbs., 2 oz. Services 1995

30-Ton King Pin / Brake Anchor Pin Pusher

Features and Benefits: This installer is the most accurate way to ensure that the rear main seal is set to the correct depth on the crankshaft...

Features and Benefits: Fast 25 Mega-sample per second sample rate Built in reference data base includes coverage from 1985-2006 Glitch...

C FRAME

Features and Benefits: Meets ASME B30.1 standards Stroke 2.24" 102.9 ton at 10,000 PSI Lifetime warranty  

Features and Benefits: Twin Ram engineered for increased strength and durability Center hole ideal for push/pull applications Tapped b...

Features and Benefits: The bent end, intended for NVG3500 and NV4500 manual transmissions, works on 1996 to 2004 full-size 2WD and 4WD trucks,...

Features and Benefits: This installer works on crankshaft rear oil seals that come with or without a metal wear sleeve Designed for use on 1993

Features and Benefits: Meets ASME B30.1 standards Stroke 6 1/4" 54.95 ton at 10,000 PSI Lifetime warranty

Features and Benefits: Spring return; cylinder retracts quickly in any orientation Twin ram engineered for increased strength and durabili...

Features and Benefits: Works on Ford, GM, and Chrysler vehicles with Saginaw, Thompson and Ford C111 and C2 power steering pumps Fits 1 1/8 in., 1...

Features and Benefits: Has a 21 mm, 12-point design Accommodates a 1/2" drive ratchet or breaker bar Can be used on the nut to ...

RESERVOIR, 2 Gallon

Features and Benefits: Services 1995-1996 Ford F-series 1/2 ton trucks and full size Bronco with automatic hubs 1/2" square drive Wt.,...

Features and Benefits: Installs power steering pump pulleys on 1992

Features and Benefits: Works on various domestic and import models Design makes it easier to hold on to than the key ring style release to...

Low Range AMP Probe

Features & Benefits: Engineered for increased strength and durability and meets the ASME B30.1 standards For use with Grip-O-Matic® pu...

Features and Benefits: Finds electrical problems that drain the battery Digital amp meter takes the guesswork out of a complicated job ...

Features and Benefits: Noid Lites are a proven test device to quickly determine if the electrical signal is present at the fuel injector S...

AIR/HYD. PUMP with REMOTE CONTROL

Features and Benefits: Use with OTC7507 CV joint fork and OTC1155 slide hammer to remove an axle assembly from the transaxle without causing damag...

Features and Benefits: A full function multimeter with an insulation test feature is used to test for voltage leaks through insulation found on Hy...

Features and Benefits: Perform wireless battery and system tests directly from the OTC Encore and Evolve scan tools. Test automotive batte...

2-speed Hydraulic Hand Pump

CUP RECEIVING

Features and Benefits: One-size-fits-all Includes a 6 foot coil cord with alligator clip  Wt., 4 oz. Simply by sliding across the uph...

Features and Benefits: Covers GM, Ford, Chrysler, and a variety of import vehicles Computer edge board and header release tool. Eac...

PERFORMANCE GAS FILTER KIT, (4

Features and Benefits: Works on FWD, RWD, and 4WD import and domestic vehicles Twice the load capacity (10 ton) as the original 7503 puller Uses a...

FUEL LINE WRENCH

Features and Benefits: Tips include straight, 45 degree, and 90 degree angles in four different sizes (.038, .047, .070, and .090" diameter) Set c...

Features and Benefits: Constructed from high quality polyurethane, these high visibility coil cord test leads have superior memory retention ...

Features and Benefits: Glow plug tester allows for testing without removing glow plug from engine Powers the glow plug to test the plug in...

Features and Benefits:     Rear axle pulling plate with 5-pounds slide hammer assembly Enables you to remove flange-type rear axles from m...

Features and Benefits: Oil changes are the #1 service your shop will perform each year, enhance your service with this complete electronic too...

Features and Benefits: Auto/Manual ranging Resistance, Continuity, Diode and Capacitance Tests RPM Measurement Temperature Measure...

Features and Benefits: For Navistar 6.9 and 7.3L diesel engines Fits 5/8" hex nut Loosen or tighten fuel lines at the fuel injector no...

Features and Benefits: 12' heavy duty red coil cord lead Checks 6 and 12 volt systems Ergonomic slim designed clear handle Bright ...