Gearwrench

Features and Benefits: Tool helps to move front disc brake pistons back into position while installing new brake shoes Works with most all disc br...

Features and Benefits: Features a redesigned puller yoke to fit late model GM cars with (S.I.R.) air bags 1992 to present Works on older GM, Chrys...

Features and Benefits: Pliers cover a complete range of filter removal from 2" to 5" (50mm to 125mm) in diameter Ratchet and lock mechanism allow ...

1/4" Drive Magnetic Bit Shaft - 10"

Fixed Tip Snap Ring Pliers - .047" Straight

Features and Benefits: For use on front wheel drive axle nuts Extra deep to fit over spindle shaft. Black impact grade material U...

Features and Benefits: Complete hone for brake, master and wheel cylinders 3/4 through 2-1/2" capacity, with 1-1/8" medium-grit stones Multi-purpo...

Ford Clutch Tool Hydraulic Quick Disconnect Tool

Features and Benefits: Gauge is calibrated from 0 to 100 psi Five different adapters are included for both domestic and imported engines Test engi...

Features and Benefits: 2897-90 Screw Installer KD Tools Screw Installer for Others for KDT2897 - KDT2897-90.

Features and Benefits: Use on 1985 to current Ford F250-350 with Dana 80 rear axle, and 10-1/4" ring gear Use on 1987 E350 to current with Da...

Features and Benefits: Tool adjusts clearance between drum brake and brake shoe It fits through a slot in the backing plate and turns the star whe...

Features and Benefits: KD Tools Snap Ring Pliers Tips for KDT3151 KDT3151-77.

9 Piece Bushing Remover/Installer Set 1-5/8" to 1-3/4"

Features and Benefits: 5 pcs included 5 Piece Pick and Hook Set PICK & HOOK SET 5 PC. 5 pcs included Use picks to pull O-rings, seals, cotte...

Features and Benefits: Fits spindle nut on Chevy, 1/2-ton GMC, Blazer, Bronco, Bronco 11, Ranger, Explorer, 1/2- and 3/4-ton Ford, spline-type hub...

Features and Benefits: 1/2" Multi-Craft chuck (3/8-24) and key Also available in different sizes to satisfy a broad range of demand This is the mo...

Features and Benefits: Aligns single disc clutches on American and imported cars, light trucks, and tractors Plate aligning cone has 1-1/8 in. max...

Features and Benefits: Makes picking up hard to reach ferrous material easy Proudly made in the U S A with a lifetime warranty Magnet swivels to a...

1/2" Chuck Key with 1/4" Pilot

Features and Benefits: Directly measure a variety of torque values Pointer moves clockwise or counter clockwise Scale includes both SAE and Metric...

Features and Benefits: Twist bit to firmly hold phillips screws for easy starting Reaches hard-to-get areas Strong magnet on opposite end retrieve...

Features and Benefits: Holds screw securely for hard-to-reach areas Twist bit to hold screw for easy starting Strong magnet on opposite end picks ...

Features and Benefits: Sturdy plastic handle for grip Used when working on clutches, transmissions, installing rings or other jobs that require th...

SAE File Thread Restorer 8 Sizes

Features and Benefits: Stones are for 2833 engine cylinder hone Grit: medium Grit No.: 240 For general purpose of honing and glaze breaking The st...

Pocket Telescoping Magnetic Pickup Tool 5-7/8 to 25-9/16"

Features and Benefits: Attach bleeder to loosened bleeder screw and pump brake pedal until all air bubbles are removed from the hose Two adapters ...

Features and Benefits: Used to remove the window molding clips on GM, Ford and AMC vehicles Sure-grip plastic handle for easy an hold Simple and e...

Features and Benefits: Bend 3/16 in., 5/16 in. and 3/8 in. diameter tubing without kinking Place tubing in groove and turn the handle to bend Heav...

Features and Benefits: Tightens or loosen nuts on the battery terminal clamps Serrated jaws give better grip Handles are offset for workin...

0

Features and Benefits: Checks cylinder compression from 0 to 300 psi (0-21 Kg/cm2) Adapters fit 14mm and 18mm spark plug holes Special air hold va...

Features and Benefits Superior Heat Resistance Over Justrite The EZ Level™ Bolster System JOBOX Hi-Viz Safety Information Label System...

Features and Benefits: Ships from 1 of 10 warehouses around the country: You get your tools FAST with standard shipping! 6" X 3/8 VORTEX EXTEN Han...

Features and Benefits: Clean carbon, dirt and paint from metal and other surfaces with this wooden-handled brush Overall length: approximately 14 ...

Features and Benefits: Full polish, nickel plated chrome socket Thin wall and arc design for better access Fits into XL Pass-Thru Ratc...

12" Tie Rod Seperator 21/32" Opening

Features and Benefits: Full polish, nickel plated chrome socket Thin wall and arc design for better access Fits into XL Pass-Thru Ratc...

Features and Benefits: Full polish, nickel plated chrome socket Thin wall and arc design for better access Fits into XL Pass-Thru Ratc...

Features and Benefits: Bend 3/16 in., 1/4 in., 5/16 in. and 3/8 in. copper and steel tubing Tool makes tight bends without the tube collapsing Rol...

Features and Benefits: Removes broken studs, set screws, pipe and Alemite fittings Drill a hole in the screw and place extractor into hole. Tap lig...

Features and Benefits: Use this durable steel brush to remove corrosion and dirt from battery terminals and cable clamps Rugged steel case has a l...

Features and Benefits: Serviceable tool works in hard-to-reach areas Keep well oiled Replacement part KDT2031-82 cutter chain assembly It will not...

Features and Benefits: Removes filters 3-7/16" to 3-3/4" (87mm to 95mm) in diameter Band will not crush filter Do not use with power tools Made fr...

Features and Benefits: Use the set to measure spark plug gaps and other ignition clearances from 0.010 to 0.045" (0.254 to 1.143mm) Six wi...

Features and Benefits: Tool can be used to pinch off some emission system hoses Pliers include automatic locking ratchet Do not use on wire-reinfo...

Features and Benefits: Check 6 and 12V circuits for voltage and spark plugs for spark. To use, ground the clip and touch the probe to the ...