Skip to content
Announce something here
Announce something here

Gearwrench

Filters

  • SOC 3/8 3/8D 6PT
    $4.21 - $4.21
    $4.21
    $4.21 - $4.21
    $4.21

    GearWrench 3/8 in. Drive Pass-Thru KDT132120GR GearWrench

    Features and Benefits: Full polish, nickel plated chrome socket Thin wall and arc design for better access Fits into XL Pass-Thru Ratc...

    View full details
    $4.21 - $4.21
    $4.21
    $4.21 - $4.21
    $4.21
  • CIRCUIT TESTER LOW VOLTAGE 6V & 12V
    $19.69 - $19.69
    $19.69
    $19.69 - $19.69
    $19.69

    Low Voltage 6V and 12V Circuit Tester KDT129 GearWrench

    Features and Benefits: Test for voltage in 6 and 12 Volt systems Ground clip and touch probe to point being tested The tester bulb wil...

    View full details
    $19.69 - $19.69
    $19.69
    $19.69 - $19.69
    $19.69
  • SWITCH REMOTE STARTER
    $26.46 - $26.46
    $26.46
    $26.46 - $26.46
    $26.46

    Remote Control Starter Switch KDT124 GearWrench

    Remote Control Starter Switch

    $26.46 - $26.46
    $26.46
    $26.46 - $26.46
    $26.46
  • SOC VORTEX 7/16" 6PT
    $2.73 - $2.73
    $2.73
    $2.73 - $2.73
    $2.73

    GearWrench 1/4 in. Drive Pass-Thru KDT122140GR GearWrench

    Features and Benefits: Full polish, nickel plated chrome socket Thin wall and arc design for better access Fits into XL Pass-Thru Ratc...

    View full details
    $2.73 - $2.73
    $2.73
    $2.73 - $2.73
    $2.73
  • SCREW EXTRACTOR 1/2 & 9/16IN. SCREW
    $6.67 - $6.67
    $6.67
    $6.67 - $6.67
    $6.67

    Screw Extractor 1/2 & 9/16in. Screw KDT1112 GearWrench

    Features and Benefits: Removes broken studs, set screws, pipe and Alemite fittings Drill a hole in the screw and place extractor into hole. Tap lig...

    View full details
    $6.67 - $6.67
    $6.67
    $6.67 - $6.67
    $6.67
  • SCREW EXTRACTOR 3/8IN. SCREW
    $5.26 - $5.26
    $5.26
    $5.26 - $5.26
    $5.26

    Screw Extractor 3/8in. Screw KDT1110 GearWrench

    Screw Extractor 3/8in. Screw

    $5.26 - $5.26
    $5.26
    $5.26 - $5.26
    $5.26
  • SOC T10 1/4D INT TRX MALE
    $6.64 - $6.64
    $6.64
    $6.64 - $6.64
    $6.64

    1/4 in. Drive Torx Bit Sockets KDT80172 GearWrench

    Features and Benefits: Hard steel bits for strength and durability Patented bit holding principle within socket base for maximum bit retention Hea...

    View full details
    $6.64 - $6.64
    $6.64
    $6.64 - $6.64
    $6.64
  • 1/4" DR 6 PT. MID LENGTH SOCKET 15MM
    $6.05 - $6.05
    $6.05
    $6.05 - $6.05
    $6.05

    GearWrench 1/4 in. Drive 6-Point Metric Mid Length 15mm Socket KDT80150S GearWrench

    Features and Benefits: Surface Drive Technology reduces fastener rounding Chamfered opening to guide fastener into socket Large hard-stamped size ...

    View full details
    $6.05 - $6.05
    $6.05
    $6.05 - $6.05
    $6.05
  • SOC 13MM 1/4D 6PT DP
    $6.59 - $6.59
    $6.59
    $6.59 - $6.59
    $6.59

    1/4 in. Drive 6 and 12-Point Metric Deep Length Sockets KDT80148 GearWrench

    Features and Benefits: Surface Drive

    $6.59 - $6.59
    $6.59
    $6.59 - $6.59
    $6.59
  • SOC 12MM 1/4D 6PT DP
    $6.89 - $6.89
    $6.89
    $6.89 - $6.89
    $6.89

    1/4 in. Drive 6 and 12-Point Metric Deep Length Sockets KDT80147 GearWrench

    Features and Benefits: Surface Drive

    $6.89 - $6.89
    $6.89
    $6.89 - $6.89
    $6.89
  • SOC 10MM 1/4D 6PT DP
    $6.89 - $6.89
    $6.89
    $6.89 - $6.89
    $6.89

    1/4 in. Drive 6-Point Deep Socket, 10mm KDT80145 GearWrench

    Features and Benefits: Deep socket for better access Knurled ends provide grip surface Turn down at base of socket provides grip surface to pull s...

    View full details
    $6.89 - $6.89
    $6.89
    $6.89 - $6.89
    $6.89
  • SOC 9MM 1/4D 6PT DP
    $6.89 - $6.89
    $6.89
    $6.89 - $6.89
    $6.89

    Socket 9MM 1/4D 6PT Deep KDT80144 GearWrench

    Socket 9MM 1/4D 6Point DeepFeatures and Benefits: Surface Drive

    $6.89 - $6.89
    $6.89
    $6.89 - $6.89
    $6.89
  • SOC 4MM 1/4D 6PT DP
    $6.89 - $6.89
    $6.89
    $6.89 - $6.89
    $6.89

    1/4" Drive 6 Point Deep Metric Socket 4mm KDT80138 GearWrench

    Features and Benefits: Surface Drive® Technology Reduces Fastener Rounding. Chamfered Opening to Guides Fastener Into Socket Large Har...

    View full details
    $6.89 - $6.89
    $6.89
    $6.89 - $6.89
    $6.89
  • SOC 15MM 1/4D 6PT
    $4.62 - $4.62
    $4.62
    $4.62 - $4.62
    $4.62

    1/4" Drive 6 and 12 Point Metric Standard Length Sockets KDT80137 GearWrench

    1/4" Drive 6 and 12 Point Metric Standard Length SocketsFeatures and Benefits: Surface Drive

    $4.62 - $4.62
    $4.62
    $4.62 - $4.62
    $4.62
  • 7mm 1/4" DR 6PT Std Metric Socket
    $4.62 - $4.62
    $4.62
    $4.62 - $4.62
    $4.62

    1/4" Drive 6 Point Standard Metric Socket 7mm KDT80129 GearWrench

    Features and Benefits: Off-corner loading design reduces fastener rounding Chamfered opening quickly guides fasteners into socket Hard stamped size...

    View full details
    $4.62 - $4.62
    $4.62
    $4.62 - $4.62
    $4.62
  • SOC 1/2 1/4D 6PT DP
    $6.59 - $6.59
    $6.59
    $6.59 - $6.59
    $6.59

    1/4" Drive 6 Point Deep Socket, 1/2" KDT80123 GearWrench

    Features and Benefits: Serration as deep as the fastener Rings at base provide quick SAE identification Turn down at base of socket ...

    View full details
    $6.59 - $6.59
    $6.59
    $6.59 - $6.59
    $6.59
  • SOC 7/32 1/4D 6PT DP
    $6.59 - $6.59
    $6.59
    $6.59 - $6.59
    $6.59

    1/4 in. Drive 6-Point Deep SAE Fractional 7/32 in. Socket KDT80116 GearWrench

    Features and Benefits: Full polished, nickel chrome plated finish resists against rust and corrosion Large, hard stamped part number and size for ...

    View full details
    $6.59 - $6.59
    $6.59
    $6.59 - $6.59
    $6.59
  • SOC 3/16 1/4D 6PT DP
    $6.89 - $6.89
    $6.89
    $6.89 - $6.89
    $6.89

    1/4" Drive 6 Point Deep Socket, 3/16" KDT80115 GearWrench

    Features and Benefits: Serration as deep as the fastener Rings at base provide quick SAE identification Turn down at base of socket ...

    View full details
    $6.89 - $6.89
    $6.89
    $6.89 - $6.89
    $6.89
  • SOC 9/16 1/4D 6PT
    $4.42 - $4.42
    $4.42
    $4.42 - $4.42
    $4.42

    1/4" Drive 6 Point Standard Socket, 9/16" KDT80114 GearWrench

    Features and Benefits: Shallow broach to standard nut depth Rings at base provide quick SAE identification Turn down at base of socke...

    View full details
    $4.42 - $4.42
    $4.42
    $4.42 - $4.42
    $4.42
  • SOC 3/8 1/4D 6PT
    $4.42 - $4.42
    $4.42
    $4.42 - $4.42
    $4.42

    1/4" Drive 6 Point Standard Socket, 3/8" KDT80111 GearWrench

    Features and Benefits: Shallow broach to standard nut depth Rings at base provide quick SAE identification Turn down at base of socke...

    View full details
    $4.42 - $4.42
    $4.42
    $4.42 - $4.42
    $4.42
  • SOC 11/32 1/4D 6PT
    $4.42 - $4.42
    $4.42
    $4.42 - $4.42
    $4.42

    1/4" Drive 6 Point Standard Socket, 11/32" KDT80110 GearWrench

    Features and Benefits: Shallow broach to standard nut depth Rings at base provide quick SAE identification Turn down at base of socke...

    View full details
    $4.42 - $4.42
    $4.42
    $4.42 - $4.42
    $4.42
  • 2-Piece Extra Long Combination Dual Material Screw
    $54.23 - $54.23
    $54.23
    $54.23 - $54.23
    $54.23

    2-Piece Extra Long Combination Dual Material Screwdriver KDT80068 GearWrench

    Features and Benefits: Includes PH#2 and 1/4

    $54.23 - $54.23
    $54.23
    $54.23 - $54.23
    $54.23
  • 6PC COMIBINATION SCREWDRIVER SET
    $81.23 - $81.23
    $81.23
    $81.23 - $81.23
    $81.23

    6-Piece Combination Dual Material Screwdriver Set KDT80050 GearWrench

    Features and Benefits: Dual material handle for comfort and performance Tri-Lobe ergonomic handle for optimal balance of strength and comfort "Spe...

    View full details
    $81.23 - $81.23
    $81.23
    $81.23 - $81.23
    $81.23
  • T-6 x 60mm GearWrench
    $7.73 - $7.73
    $7.73
    $7.73 - $7.73
    $7.73

    T-6 x 60mm GearWrench KDT80038 GearWrench

    Features and Benefits: Black Oxide non slip tip "Speed Zone" for turning in lower torque applications Innovative dual material handle ...

    View full details
    $7.73 - $7.73
    $7.73
    $7.73 - $7.73
    $7.73
  • SCREW DRIVER
    $7.73 - $7.73
    $7.73
    $7.73 - $7.73
    $7.73

    T-5 x 60mm GearWrench Torx KDT80037 GearWrench

    Features and Benefits: Black Oxide non slip tip "Speed Zone" for turning in lower torque applications Innovative dual material handle ...

    View full details
    $7.73 - $7.73
    $7.73
    $7.73 - $7.73
    $7.73
  • #1 X 60MM
    $7.26 - $7.26
    $7.26
    $7.26 - $7.26
    $7.26

    #1 x 60mm GearWrench Phillips Mini Screwdriver KDT80033 GearWrench

    Features and Benefits: Black Oxide non slip tip "Speed Zone" for turning in lower torque applications Innovative dual material handle ...

    View full details
    $7.26 - $7.26
    $7.26
    $7.26 - $7.26
    $7.26
  • T30 1/4 X 4
    $13.70 - $13.70
    $13.70
    $13.70 - $13.70
    $13.70

    T-30 x 4" GearWrench Torx KDT80029 GearWrench

    Features and Benefits: Black oxide non slip tip Oil and solvent resistant "Speed-Zone" for turning in lower torque applications Tr...

    View full details
    $13.70 - $13.70
    $13.70
    $13.70 - $13.70
    $13.70
  • 3/8 X 8"W/ BOLSTER
    $23.87 - $23.87
    $23.87
    $23.87 - $23.87
    $23.87

    3/8" x 8" GearWrench Slotted Screwdriver with Nut Bolster KDT80022 GearWrench

    Features and Benefits: Black Oxide non slip tip Laser etched part number and size "Speed Zone" for turning in lower torque applications Tri-lobe e...

    View full details
    $23.87 - $23.87
    $23.87
    $23.87 - $23.87
    $23.87
  • 3/16 X 6 W/CABINET TIP
    $12.08 - $12.08
    $12.08
    $12.08 - $12.08
    $12.08

    3/16" x 6" GearWrench Slotted Screwdriver with Cabinet Tip KDT80018 GearWrench

    Features and Benefits: Cabinet tip Laser etched part number and size "Speed Zone" for turning in lower torque applications Tri-lobe ergonomic hand...

    View full details
    $12.08 - $12.08
    $12.08
    $12.08 - $12.08
    $12.08
  • 3/16 in. x 4 in. GearWrench
    $11.60 - $11.60
    $11.60
    $11.60 - $11.60
    $11.60

    3/16 in. x 4 in. GearWrench KDT80017 GearWrench

    Features and Benefits: Black Oxide non slip tip Laser etched part number and size "Speed Zone" for turning in lower torque application...

    View full details
    $11.60 - $11.60
    $11.60
    $11.60 - $11.60
    $11.60
  • 1/8 X 3" W/ CABINET TIP
    $10.51 - $10.51
    $10.51
    $10.51 - $10.51
    $10.51

    1/8" x 3" GearWrench Slotted Screwdriver with Cabinet Tip KDT80015 GearWrench

    Features and Benefits: Cabinet tip Laser etched part number and size "Speed Zone" for turning in lower torque applications Tri-lobe ergonomic hand...

    View full details
    $10.51 - $10.51
    $10.51
    $10.51 - $10.51
    $10.51
  • 1/4" X 6" SLOTTED SCREWDRIVER
    $15.99 - $15.99
    $15.99
    $15.99 - $15.99
    $15.99

    1/4" x 6" GearWrench Slotted Screwdriver with Hex Bolster KDT80014 GearWrench

    Features and Benefits: Black Oxide non slip tip Laser etched part number and size "Speed Zone" for turning in lower torque applications Nut bolste...

    View full details
    $15.99 - $15.99
    $15.99
    $15.99 - $15.99
    $15.99
  • No. 3 x 6 in. GearWrench
    $19.23 - $19.23
    $19.23
    $19.23 - $19.23
    $19.23

    No. 3 x 6 in. GearWrench KDT80011 GearWrench

    Features and Benefits: Black Oxide non slip tip Laser etched part number and size "Speed Zone" for turning in lower torque application...

    View full details
    $19.23 - $19.23
    $19.23
    $19.23 - $19.23
    $19.23
  • #0 X 2-1/2" PHILLIPS
    $10.51 - $10.51
    $10.51
    $10.51 - $10.51
    $10.51

    #0 x 2-1/2" GearWrench Phillips Screwdriver KDT80000 GearWrench

    Features and Benefits: Black Oxide non slip tip Laser etched part number and size "Speed Zone" for turning in lower torque applications

    $10.51 - $10.51
    $10.51
    $10.51 - $10.51
    $10.51
  • SCREW EXTRACTOR SET 5 PC
    $28.52 - $28.52
    $28.52
    $28.52 - $28.52
    $28.52

    5 Piece Screw Extractor Set KDT720 GearWrench

    Features and Benefits: Features undercut flutes for more positive grip Each extractor has the size stamped on it Heat treated for traditional stren...

    View full details
    $28.52 - $28.52
    $28.52
    $28.52 - $28.52
    $28.52
  • 14 IN. MAXXLOCK BRASS SLEDGE HAMMER 4 LB.
    $298.85 - $298.85
    $298.85
    $298.85 - $298.85
    $298.85

    14 in. MaxxLock Brass Sledge Hammer 4 lb. KDT69-719G GearWrench

    Features & Benefits: Perform significantly better than steel rod handles, with the fiberglass structure testing beyond 5,000 overstrikes w...

    View full details
    $298.85 - $298.85
    $298.85
    $298.85 - $298.85
    $298.85